Honeywell FF-ST4 Series - FF-ST4C09AM2

Description

Response time :- 16ms supply voltage :- 24vdc, +/-20%(5w) protection height :- 894 mm sealing :- IP 65 Output Switching capacity :-0.35A/24Vdc Serial No :- 20780 "State :- Off On Output Vo <5V>11V Output Io >2mA >6mA" " Resolution (min. object detection size) :- 14 mm, 18 mm, 30 mm, 80 mm Nominal scanning range :- 0 m to 3.5 m (for 14 mm resolution); 0.25 m to 10 m (for 18 mm, 30 mm, 80 mm resolutions) Angle of divergence :- max. ±5° above 3 m (as per IEC/EN 61496-2) Emitting light source :- infrared, pulsed, 880 nm Supply voltage :- 24 Vdc (±20%) for the emitter and the receiver Power consumption :- 5 W max. for the emitter, 5 W max. for the receiver Output type :- 2 safety solid state outputs, push-pull/PNP type with Normally Open characteristics Switching capability :- 350 mA max. at 24 Vdc Restart time after power up :- >1 s (automatic mode) Restart time after beam release :- 80 ms (without EDM), 150 ms (with EDM) Leakage current :- 0.25 mA Load impedance :- 70 Ohm min., 5 kOhm max. Voltage drop :- <2.3 Vdc Load turn-on voltage :- 5 V min. on resistive loads, 7 V min. on inductive loads Test pulse width/recurrence :- 2 pulses (width 200 us and 75 us), separated by 300 us, frequency from 3.3 ms to 8 ms (depending on height) Protections :- short-circuits and cross-faults, overloads (0.4 A max./0 Vdc; 0.9 A max./24 Vdc), reversed polarity, micro-cut-off 10 ms (100% voltage breakdown, 10 Hz) Max. cable length :- 100 m [328.08 ft] (capacitance: 10 nF) External contact type :--- relay contact, or static (solid state) PNP or static (solid state) NPN (automatic recognition - no push-pull output allowed) Filtering time :- 20 ms by default, 150 ms on the EDM input Voltage switching thresholds (high/low) :- 14.5 Vdc min., 4.5 Vdc (complies with IEC 61131-2, for type 2 sensors) Input current (high/low) :- 20 mA; 10 mA at 24 Vdc Max. voltage :- 29 Vdc Housing material :- aluminum alloy End cap material :- zamak Window material :- PMMA (Polymethyllethacrylate"